Vendor: Forever 18 Inches
Type: 18 Inch Modern
Price: 6.99

Here’s a versatile dress designed for seamstresses who hate sewing set-in sleeves! The Easy Sleeves Dress, by Forever 18 Inches, comes with a raised waist, a center front closure with button-covered snaps or hook and loop, a “V” neck with an optional sailor collar and front tie, back ties for a customized fit, and dolman sleeves with rolled cuffs or elastic-gathered ruffles. An added bonus are the interchangeable sleeve and neck finishes that can be combined for your own customized look. Make it crisp and nautical, sweet and demure, or in between to suit your own personal tastes. No matter how you choose to interpret the dress, the easy sleeves will simplify the construction and make your sewing project quicker and easier. Have fun with the possibilities! 

Recommended Fabrics:

• Option 1: soft, lightweight fabric with a drape such as lightweight quilter’s cotton for the main part of the dress, light to medium weight natural fabric for the contrasting Cuffs and Collar,  batiste or similar fabric for the Collar Lining, and lightweight silky fabric OR ribbon for the Front Tie.
• Option 2: lightweight quilter’s cotton or chambray, Tana Lawn, soft shirting, or other similar fabrics, and optional very lightweight fusible interfacing for the Facing

Supplies Needed:
- Option 1: 1/2 yd. of soft, lightweight fabric with a drape such as lightweight quilter’s cotton for the main part of the dress, ¼ yd. of light to medium weight natural fabric for the contrasting Cuffs and Collar, ¼ yd. (or large scrap) of batiste or similar fabric for the Collar Lining, and ¼ yd. of lightweight silky fabric OR 8” of ½” – 5/8” ribbon for the Front Tie

- Option 2: ½ yd. of lightweight quilter’s cotton or chambray, Tana Lawn, soft shirting, or other similar fabrics, and optional ¼ yd. of very lightweight fusible interfacing for the Facing

Notions:
Options 1 and 2 and Dress:
1. Option 1: 2/3 yds. of 3/16” soutache braid OR 1/8” wide ribbon
2. Option 2: Two *7-1/2” long pieces of 1/8” wide elastic

All Options:
1. Matching and optional contrasting thread
2. A pair of small, very sharp scissors to trim seam allowances
3. Fray Check®
4. A marking tool such as chalk or a Frixion® pen (the Frixion® pen mark disappears when dry heat is applied. Be sure to use it on the WRONG side of your garment!)
5. Three medium-sized snaps (8” of Hook and Loop tape can be substituted if desired)
6. Eight ¼” buttons for the front closure

Skill Level:  Intermediate

What You Get: One 35 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

larougetdelisle and the designers featured are not affiliated with American Girl®. 

Vendor: Forever 18 Inches
Type: 18 Inch Modern
Price: 6.99

Help your doll to beat the heat with the Warm Weather Rompers pattern  by Forever 18 Inches! A fusion of vintage and contemporary design elements, the pattern features wide-cut bottoms with options for angled ruffles, bloomer-style pants, or plain pants. Bodice options include a fully lined faux button front or princess-seamed front, and a back closure with adjustable shoulder ties. Two sets of cutting lines are included on the bodice pieces to provide an optimal fit. Best of all, the bodice and pants options are interchangeable so you can create your own customized rompers!

This PDF pattern is designed to fit 18-inch dolls such as American Girl®. 

Recommended Fabrics: All options: Lightweight denim, poplin, chambray, Kona® cotton, medium weight quilter’s cotton, or other natural fabrics; 1/6 yd. of lightweight lining fabric such as batiste or lawn

Supplies Needed:

- Option 1: 2/3 yd. of 45" wide fabric
- Option 2: ½ yd. of 45" wide fabric
- Option 3: ½ yd. of 45" wide fabric

All Options: 1/6 yd. of lightweight fabric (or equivalent scrap size) for the Lining, such as batiste or lawn

All Options:
1. Matching thread and optional contrast thread
2. Optional: very lightweight fusible interfacing for bodice pieces cut on the bias or cross grain
3. Two-three medium-sized snaps OR 3" of Hook-and-Loop
4. Fray Check®
5. Optional: a Frixion® pen for marking dots and cutting lines
6. Optional: a hemostat for turning the Tie Belt to the RIGHT side

For Options 1 and 2 Add: Five ¼” buttons
For Option 2 Add: Two 6" long pieces of ¼" elastic (1/3 yd. of ¼" elastic)

Skill Level: Intermediate

What You Get: One 51 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

PixieFaire and the designers featured are not affiliated with American Girl®.

Vendor: Forever 18 Inches
Type: 18 Inch Modern
Price: 8.99

Get both the Flirty Boho Blouse and Flirty Mini Skirt from Forever 18 Inches bundled together and save! These pattern are designed to go together, but are available separately as well.

This simple but stylish blouse has it all: it’s pretty, it’s versatile, and it’s quick and easy to sew! Features include dropped dolman sleeves, a “V” neck and trendy loose fit, a back closure, two sleeve variations and a Bonus dress length.

The blouse can cross all seasons and take on a wide range of looks from casual to formal depending on the choice of fabrics.

The Flirty Mini Skirt receives its name from the modest notch and slit found on the hemline. These classic skirts feature seamed front and back panels, an elasticized back for a universal fit, and look great in fabrics ranging from casual to dressy.

The Option 1 skirt is an Easy-level sewing pattern with front and back notches and a lining.

The Option 2 skirt is an Intermediate-level design and is unlined to allow for heavier fabrics such as faux leather. Features include seamed and topstitched panels and a slit on the front and back of the skirt.

Both patterns are quick-sewing projects appropriate for craft fair and Etsy sellers. Sew a stack of them in a day and make the human and vinyl dolls in your life squeal with joy and gratitude! (You don’t have to tell anyone that it was easy.)

These PDF sewing patterns are designed to fit 18" dolls such as American Girl®. 

Recommended Blouse Fabrics:  All Options: Soft, lightweight fabrics with a drape such as batiste, lawn, challis, lightweight quilter’s cotton, lightweight chambray, silk, soft shirting, or other similar fabrics

Supplies Needed:
Options 1 and 2: 1/2 yd. of soft, lightweight fabrics with a drape such as batiste, lawn, challis, lightweight quilter’s cotton, lightweight chambray, silk, soft shirting, or other similar fabrics. The Bonus Dress will need 2/3 yd. of fabric.

Notions:
Options 1 and 2 and Dress Length:
1. A small sturdy safety pin (Option 1 only)
2. Three medium-sized snaps OR Hook and Loop tape
3. Optional: 1/6 yd. (or large scrap) of very lightweight fusible interfacing
4. Two 4-1/4” long pieces of 1/8” wide elastic for Option 1, and two *7-1/2” long pieces of 1/8” wide elastic for Option 2

All Options:
1. Matching and contrasting thread
2. A pair of small, very sharp scissors to trim seam allowances
3. Optional: Fray Check®
4. A marking tool such as chalk or a Frixion® pen (the Frixion® pen mark disappears when dry heat is applied. Be sure to use it on the WRONG side of your garment!)

Recommended Skirt Fabrics: 

• Option 1: Lightweight denim, poplin, chambray, Kona® cotton, medium weight quilter’s cotton, or other natural fabrics; 1/4 yd. of lightweight lining fabric such as batiste or lawn
• Option 2: Medium weight/bottom weight fabrics such as denim, faux suede, vegan leather, poplin, Kona® cotton, quilter’s cotton, or other similar-weight fabrics

Supplies Needed:
Fabric Requirements: All fabrics should have a tight weave and no stretch
- Option 1: 1/4 yd. of lightweight denim, poplin, chambray, Kona cotton, medium weight quilter’s cotton, or other natural fabrics; 1/4 yd. of lightweight lining fabric such as batiste or lawn
- Option 2: 1/4 yd. of medium weight/bottom weight fabrics such as denim, faux suede, vegan leather, poplin, Kona cotton, quilter’s cotton, or other similar-weight fabrics

Notions:
All Options:
1. A small sturdy safety pin (approximately 3/8” x 7/8” or smaller) OR a bobby pin
2. 5” of 3/8” wide elastic (Note: If you use thick fabric for the Option 2 Skirt, use ¼” elastic)

All Options:
1. Matching and contrasting thread
2. A pair of small, very sharp scissors to trim seam allowances
3. Optional: Fray Check®
4. A marking tool such as chalk or a Frixion® pen (the Frixion® pen mark disappears when dry heat is applied. Be sure to use it on the WRONG side of your fabric!)

Skill Level: Easy to Intermediate

What You Get: One 30 page sewing pattern and one 29 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

larougetdelisle and the designers featured are not affiliated with American Girl®.

Vendor: Forever 18 Inches
Type: 18 Inch Modern
Price: 5.99

The Flirty Mini Skirt by Forever 18 Inches, receives its name from the modest notch and slit found on the hemline. Designed to pair with the Forever 18 Inches Flirty Boho Blouse, these classic skirts feature seamed front and back panels, an elasticized back for a universal fit, and look great in fabrics ranging from casual to dressy.

The Option 1 skirt is an Easy-level sewing pattern with front and back notches and a lining.

The Option 2 skirt is an Intermediate-level design and is unlined to allow for heavier fabrics such as faux leather. Features include seamed and topstitched panels and a slit on the front and back of the skirt.

Both skirts are quick-sewing projects appropriate for craft fair and Etsy sellers. Sew a stack of them in a day and make the human and vinyl dolls in your life squeal with joy and gratitude! (You don’t have to tell anyone that it was easy.)

Recommended Fabrics: 

• Option 1: Lightweight denim, poplin, chambray, Kona® cotton, medium weight quilter’s cotton, or other natural fabrics; 1/4 yd. of lightweight lining fabric such as batiste or lawn
• Option 2: Medium weight/bottom weight fabrics such as denim, faux suede, vegan leather, poplin, Kona® cotton, quilter’s cotton, or other similar-weight fabrics

Supplies Needed:
Fabric Requirements: All fabrics should have a tight weave and no stretch
- Option 1: 1/4 yd. of lightweight denim, poplin, chambray, Kona cotton, medium weight quilter’s cotton, or other natural fabrics; 1/4 yd. of lightweight lining fabric such as batiste or lawn
- Option 2: 1/4 yd. of medium weight/bottom weight fabrics such as denim, faux suede, vegan leather, poplin, Kona cotton, quilter’s cotton, or other similar-weight fabrics

Notions:
All Options:
1. A small sturdy safety pin (approximately 3/8” x 7/8” or smaller) OR a bobby pin
2. 5” of 3/8” wide elastic (Note: If you use thick fabric for the Option 2 Skirt, use ¼” elastic)

All Options:
1. Matching and contrasting thread
2. A pair of small, very sharp scissors to trim seam allowances
3. Optional: Fray Check®
4. A marking tool such as chalk or a Frixion® pen (the Frixion® pen mark disappears when dry heat is applied. Be sure to use it on the WRONG side of your fabric!)

Skill Level: Easy and Intermediate

What You Get: One 29 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Forever 18 Inches
Type: 18 Inch Modern
Price: 5.99

This simple but stylish blouse by Forever 18 Inches, has it all: it’s pretty, it’s versatile, and it’s quick and easy to sew! Features include dropped dolman sleeves, a “V” neck and trendy loose fit, a back closure, two sleeve variations and a Bonus dress length.

Designed to be combined with the Forever 18 Inches Flirty Mini Skirt, the blouse can cross all seasons and take on a wide range of looks from casual to formal depending on the choice of fabrics.

Etsy shop owners, craft fair sellers, and indulgent doll owners, this pattern was designed for you!

This PDF sewing pattern is designed to fit 18" dolls such as American Girl®. 

Recommended Fabrics:  All Options: Soft, lightweight fabrics with a drape such as batiste, lawn, challis, lightweight quilter’s cotton, lightweight chambray, silk, soft shirting, or other similar fabrics

Supplies Needed:
Options 1 and 2: 1/2 yd. of soft, lightweight fabrics with a drape such as batiste, lawn, challis, lightweight quilter’s cotton, lightweight chambray, silk, soft shirting, or other similar fabrics. The Bonus Dress will need 2/3 yd. of fabric.

Notions:
Options 1 and 2 and Dress Length:
1. A small sturdy safety pin (Option 1 only)
2. Three medium-sized snaps OR Hook and Loop tape
3. Optional: 1/6 yd. (or large scrap) of very lightweight fusible interfacing
4. Two 4-1/4” long pieces of 1/8” wide elastic for Option 1, and two *7-1/2” long pieces of 1/8” wide elastic for Option 2

All Options:
1. Matching and contrasting thread
2. A pair of small, very sharp scissors to trim seam allowances
3. Optional: Fray Check®
4. A marking tool such as chalk or a Frixion® pen (the Frixion® pen mark disappears when dry heat is applied. Be sure to use it on the WRONG side of your garment!)


Skill Level:  Easy

What You Get: One 30 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

larougetdelisle and the designers featured are not affiliated with American Girl®. 

Vendor: Forever 18 Inches
Type: 18 Inch Historical
Price: 8.99

The 1980s Mix and Match pattern by Forever 18 Inches is designed to allow multiple options by combining variations and accessories. The pattern features three separate garments: a detailed skirt with a geometric yoke, working pockets, belt loops, and an elasticized back for a universal fit, a simplified skirt with a yoke and elasticized back, and a loose-fitting top with rolled sleeve cuffs. Both skirts have options for Mini and Midi lengths, and the top can be made with or without the cuffs from knit or woven fabrics. A bonus Obi-style wrap belt is also included to add authentic 1980s detail to the outfits made from this pattern. The top, belt, and simplified skirt are all designed at an Easy sewing level, which makes them good candidates for Etsy and craft fair sellers. Whether you’re sewing for a valley girl or working girl, this pattern will provide authentic 1980s style. (And don’t forget to add Big Hair and slouchy-styled boots!)

This PDF sewing pattern is designed to fit 18" dolls such as American Girl®. 

Recommended Fabrics:  - Option 1: 1/3 yd. (Midi length) or ¼ yd. (Mini length) of lightweight denim, poplin, chambray, Kona cotton, quilter’s cotton, or other natural fabrics - Option 2: 1/3 yd. (Midi length) or ¼ yd. (Mini length) of lightweight denim, poplin, Kona cotton, quilter’s cotton, or other natural fabrics - Option 3: ¼ yd. yd. of light to medium weight knits with minimal stretch, or soft lightweight woven fabrics such as rayon, lawn, batiste, shirting, or lightweight quilter’s cotton - Option 4: 1/6 yd. yd. of light to medium weight woven fabric.

Supplies Needed:
Fabric Requirements: All fabrics should have a tight weave
- Option 1: 1/3 yd. (Midi length) or ¼ yd. (Mini length) of lightweight denim, poplin, chambray, Kona cotton, quilter’s cotton, or other natural fabrics
- Option 2: 1/3 yd. (Midi length) or ¼ yd. (Mini length) of lightweight denim, poplin, Kona cotton, quilter’s cotton, or other natural fabrics
- Option 3: ¼ yd. yd. of light to medium weight knits with minimal stretch, or soft lightweight woven fabrics such as rayon, lawn, batiste, shirting, or lightweight quilter’s cotton
- Option 4: 1/6 yd. yd. of light to medium weight woven fabric.

Notions:
Options 1 and 2:
1. A small sturdy safety pin (approximately 3/8” x 7/8” or smaller) OR a bobby pin
2. 5” of 3/8” wide elastic
3. Optional: cellophane tape to use as a sewing guide (Option 1)
4. Optional: A ¼” button for a faux button Waistband (Option 2)

Option 3:
1. Three medium-sized snaps OR Hook and Loop tape

Option 4:
1. 1/6 yd. (or large scrap) of very lightweight fusible interfacing

All Options:
1. Matching and contrasting thread
2. A pair of small, very sharp scissors to trim seam allowances
3. Fray Check®
4. A marking tool such as chalk or a Frixion® pen (the Frixion® pen mark disappears when dry heat is applied. Be sure to use it on the WRONG side of your dress!)
5. 1/6 yd. Fusible interfacing (or large scraps) for knits or lightweight fabrics for Options 1-3; 1/6 yd. of medium weight fusible interfacing (or a large scrap) for the Option 4 Obi Belt



Skill Level:  Easy and Intermediate 

What You Get: One 55 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

larougetdelisle and the designers featured are not affiliated with American Girl®. 

Vendor: Forever 18 Inches
Type: 18 Inch Modern
Price: 5.99

The Seal Beach Sundress, by Forever 18 Inches, is named in honor of a small beachside community located in north Orange County, California. Known for its wide sandy beaches and walkable pier, Seal Beach is a favorite hangout for families, surfers, and dogs with bandannas around their necks happily taking their owners for a stroll. The Seal Beach Sun Dress is a type of dress seen on its friendly Main St. sidewalks: pretty enough for a special occasion, and casual enough for a walk on the beach. The dress features shoulder ties, a lined dropped bodice with a faux front-button closure, and a fully gathered skirt that can be used with a border print or stripes cut on the cross grain. The skirt can also be embellished with narrow trim or tucks for a nostalgic look.

This PDF sewing pattern is designed to fit 18" dolls such as American Girl®. 

Recommended Fabrics:  Tightly woven natural fabrics such as lighter to mid-weight quilter's cotton (or other similar fabrics)

Supplies Needed:

- Option 1: 1/2 yd. of light to medium-weight natural fashion fabric and ¼ yd. of batiste or other lightweight lining fabric

- Option 2: 1 yd. of light to medium-weight natural fashion fabric (cross grain cut skirt) and ¼ yd. of batiste or other lightweight lining fabric

(Note: The Option 2 skirt can also be cut on the straight grain. If you prefer to cut the skirt on the straight grain you'll need ½ yd. of fashion fabric)

All Options:
1. Matching thread
2. Three medium-sized snaps
3. Five ¼” buttons
4. A pair of small, very sharp scissors to trim seam allowances
5. Fray Check®
6. Optional: graph Paper (or other paper) to make the pattern for the Skirt
7. A small sturdy safety pin (approximately 3/8” x 7/8” or smaller) OR a bobby pin
8. Optional: a tube turner OR a tapestry needle and extra-strong thread instead of the safety pin or bobby pin
9. Optional: cellophane tape to tape the graph paper together for pattern pieces
10. A marking tool such as chalk or a Frixion® pen (the Frixion pen mark disappears when dry heat is applied. Be sure to use it on the WRONG side of your dress!)
11. Optional: 1 yd. of narrow trim for the Option 2 Skirt

Skill Level:  Intermediate 

What You Get: One 30 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A 4 page Summary of Instructions is also included to help save on printer ink.  A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

larougetdelisle and the designers featured are not affiliated with American Girl®. 

Vendor: Forever 18 Inches
Type: Ruby Red Fashion Friends
Price: 5.99

The Faux Button Jumper, by Forever 18 Inches, is a simple pattern with detailing that looks complicated--but isn't! It looks like it has a working front placket, but looks can be deceiving. The placket is all show, and the jumper actually has only three main pattern pieces, plus cut strips for Straps and Optional Pockets. Option 1 is an Easy-level project for newer seamstresses or those who want quick results (no closures, no lining, no facing, no worries!). Option 2 is slightly more advanced, and is finished with a lining to accommodate lighter-weight fabrics. Either option can be made with or without the optional pocket(s).

The directions have been written comprehensively with many explanatory details for those who are newer to sewing. An experienced seamstress will probably be able to construct the Jumper just by reading the instructions highlighted in bold text. Happy sewing!

On Fit:
When you print this pattern, check to make sure that the scale is correct by measuring the 1” square scale on each page. Set the page margins on your printer to narrow and the print scale to none. When you begin sewing, pay special attention to the size of your seam allowances. This pattern was sized to fit snugly, and accurate seams are important to achieve a good fit.

This pattern was sized on a Ruby Red Fashion Friends™ (Chest: 7-1/8", Waist: 6-1/4", Hips: 7-3/4"). The most critical measurement is the hip size.

Please view our other listings to make this jumper for 18" dolls such as American Girl, Journey Girls, Les Cheries and Hearts for Hearts, AGAT, Kidz N Cats, and WellieWishers™ dolls. 

Recommended Fabrics:  Semi-medium weight woven fabrics such as quilter's cotton, lightweight denim, chintz, chambray, or corduroy for the RIGHT side Main Fabric; lightweight fabric such as lawn or batiste for the Lining. Not suitable for stretch fabrics.

Supplies Needed:
Option 1: ¼ yd. of bottom-weight fabric such as medium-weight twill, corduroy, denim, or heavy quilting fabric. Not suitable for stretch fabrics.

Option 2: ¼ yd. of light to semi-medium weight woven fabrics such as quilter's cotton, lightweight denim, chintz, chambray, or corduroy for the RIGHT side Main Fabric; lightweight fabric such as lawn or batiste for the Lining. Not suitable for stretch fabrics.

All Options:

1. Matching thread and optional contrast thread

2. One pair of small, very sharp scissors to trim seam allowances.

3. Eleven 1/4" buttons

4. Two small-sized snaps

5. Very lightweight interfacing (1/8 yd. or equivalent scraps)

6. Optional: Fray Check™ for woven fabrics that tend to fray

7. Optional: Frixion™ pen for marking button placements (The pen marks disappear when heat is applied!)

Skill Level:  Confident Beginner

What You Get: One 31 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!  *Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

larougetdelisle and the designers featured are not affiliated with Ruby Red Fashion Friends™.

Vendor: Forever 18 Inches
Type: 18 Inch Historical
Price: 7.99

Fashion during the 1980s was a contrast of styles and ideologies.  On one side were the glamorous fashions from Hollywood designers which typically featured wide padded shoulders, luxurious fabrics, and often a generous dose of glitz.  An opposite approach in sensibility was an emphasis on antique clothing and themes from English designers, who specialized in romantic designs with natural fabrics, dainty prints, and nostalgic details such as pin tucks and lace. However, no matter what aesthetic approach a designer chose, one consistent element in 1980s fashion was an emphasis on shoulders. Whether it was glamorous creations with exaggerated shoulders or enormous puffy sleeves like those in Princess Diana's iconic wedding dress, wide shoulders were a part of every fashionable woman's wardrobe!

The Forever 18 Inches 1980s Romantic Heroine pattern is a tribute to these ideals. The two-piece dress features a bodice top with princess seams, a dainty ruffle, front closure, and ties in the back to help cinch the bodice with a close fit.  An alternate choice features a plain bodice with flutter sleeves.  All the design elements can be mixed and matched for a personalized look.

Two skirt choices are offered:  a long gathered skirt with ruffles and tucks, and an easy double-layered contemporary circular skirt with an elasticized waistband.  No matter what your choice, I hope you enjoy sewing this blast to the past.

This PDF sewing pattern is designed to fit 18" dolls such as American Girl®. 

Recommended Fabrics:  Lighter weight quilter's cotton or other similar medium-light natural fabrics.

Supplies Needed:
Option 1: 1/2 yd. Main Fabric; ¼ yd. Lining
Option 2: 1/3 yd. Main Fabric; ¼ yd. Lining
Option 3: 1/2 yd. Main Fabric
Option 4: 1/2 yd. Main Fabric

All Options:
1. Matching thread and sewing needle; optional contrasting thread
2. A pair of small, very sharp scissors to trim seam allowances
3. A Frixion® pen (or other marking tool) for marking Dots and tracing around templates (when touched with heat, the pen markings disappear!)
4. Optional: Fray Check®
5. Optional: a hemostat or long pair of tweezers for turning small areas
6. Optional: coffee filters to help prevent thread bunching while sewing

Option 1:
1. Optional: ¼" graph paper to create the pattern for the Bodice Ruffle
2. Five ¼" buttons
3. Three small snaps

Option 2:
1. Five ¼" buttons
2. Three small snaps

Option 3:
1. Optional: ¼" graph paper to create the patterns for the Skirt and Skirt Ruffle
2. One large snap for Waistband closure

Option 4:
1. 12" of 3/8" wide elastic


Skill Level:  Intermediate 

What You Get: One 54 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

larougetdelisle and the designers featured are not affiliated with American Girl®. 

Vendor: Forever 18 Inches
Type: WellieWishers
Price: 6.99

Has your doll dreamed of playing the Grand Ole Opry one day? Does she want to look prettier than a glob of butter on a stack of wheat cakes? Well butter my biscuit and call me sassy, because the Country Diva Dress and Top is just what she needs to get gussied up!

This versatile dress, by Forever 18 Inches, features a lined princess-seamed bodice, a lined and freestanding gathered skirt, an optional faux placket, and a wide, not quite-off-the-shoulder neckline topped with a split, bias- cut ruffle. Extra cutting lines are included to fit three different doll brands. Variations include a continuous ruffle, an unlined skirt, a simplified bodice, and separate pattern pieces to create a bonus top. You can choose to make a simple project or a lace-enhanced extravaganza--but however you make it, it's guaranteed to dill your pickle!

This pattern was sized on an American Girl WellieWishers™ Doll (Chest: 6-3/4", Waist: 5-7/8", Hips 7-3/4”) and Ruby Red Fashion Friends® doll (Chest: 7-1/8", Waist: 6-1/4", Hips: 7-3/4"). The pattern also fits Hearts for Hearts Girls® (Chest: 6-1/2", Waist: 5-3/4”, Hips: 7"), which have very similar measurements. The most critical measurement is the waist size. If your dolls' measurements are different from your doll of choice you may need to make adjustments to the pattern for an optimal fit.

Country Diva design is also available for 18" dolls separately.

Suggested Fabrics: Tightly woven fabric such as quilter's cotton or other similar medium-light to medium-weight natural fabrics are ideal for the main fabric. Lightweight fabrics such as batiste or lawn work well for the Bodice Lining, and lightweight silky fabrics work well for the Skirt Lining.

Supplies Needed:

Fabric Requirements:
- Option 1: Overskirt: ¼ yd.; Skirt & Bodice Lining: 1/4 yd.; Bodice, Binding & Ruffle: 1/3 yd.
- Option 2: Bodice, Skirt, Ruffle, & Binding: 1/2 yd.; Bodice Lining: 1/6 yd.
- Option 3: Bodice, Skirt, Ruffle, Placket & Binding: 1/2 yd.; Bodice Lining: 1/6 yd.
- Option 4: Lining: 1/6 yd.; Bodice, Ruffle, & Binding: 1/3 yd.

Notions:

Option 1:
1. Five ¼" buttons
2. Three medium-sized snaps OR two pieces of Hook-and-Loop, about 3 ½” long

Option 2:
1. Trim: For Collar Ruffle 1 yd. of lightweight narrow lace, for Skirt 1-1/4 yds. of decorative braid or rickrack, for Bodice 6-1/2" decorative braid or rickrack for the princess seams, and for the center front panel three 2-1/2" pieces of decorative rickrack or trim
2. Three medium-sized snaps OR two pieces of Hook-and-Loop, about 3 ½” long

Option 3:
1. Optional: For Collar Ruffle 1 yd. of lightweight narrow lace
2. Three medium-sized snaps OR two pieces of Hook-and-Loop, about 3 ½” long

Option 4:
1. Three medium-sized snaps OR five inches of Hook-and-Loop
2. Optional: For Collar Ruffle 1 yd. of lightweight narrow lace

All Options:
1. Matching thread
2. Fray Check®
3. Frixion® pen or other marking tool
4. One pair of small, very sharp scissors to trim seam allowances

Skill Level: Intermediate

What You Get: One 56 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!  *Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

larougetdelisle and the designers featured are not affiliated with WellieWishers™, Ruby Red Fashion Friends®, Hearts For Hearts Girls®, Fray Check®, or Frixion®.

Vendor: Forever 18 Inches
Type: Ruby Red Fashion Friends
Price: 4.99

Do you love the simplicity of classic tee-shirts? Does the thought of working with knits make your teeth chatter and your knees tremble? Then the Not! For Knits Tee Shirt doll clothes pattern is for you!

If you fall into this category of seamstress, take heart and have no fear! You’ll have fun creating an easy shell-style tee or dress with a stable woven fabric, and learn a couple of simple techniques for a professional finish. Alternate techniques using bias binding have also been provided for those who prefer not to serge or zig-zag stitch their necklines.

Thumb your nose at those stretchy, unpredictable knits while you quickly sew up one adorable top after another. End your days of shame and inadequacy, and fill the closets of little vinyl people and their human friends with classic tees in every hue! The NOT! For Knits Tee-Shirt Pattern, by Forever 18 Inches, will allow you create tiny tee-shirts that will impress everyone--and you won't even need to mention that it has an "Easy" rating.

This doll clothes PDF sewing pattern is designed to fit slim 15-inch Ruby Red Fashion Friends Dolls. This pattern is also available separately for 18-inch American Girl and 14.5 inch Wellies.

Suggested Fabrics: A lightweight fabric works well with the tee, and a light-to-medium weight fabric is recommended for the dress. All fabrics should be somewhat soft, with a bit of drape. Rayon challis, soft cottons, chambray, and lawn are a few examples.

Supplies Needed:

1. 1/4 yd. woven fabric for Dress or Top
2. Matching thread
3. Three snaps OR 4” of thin Hook-and-Loop
4. Fray Check® (or other fabric sealant)

Optional: - One 3” square of very lightweight fusible interfacing
for the pocket
- Contrast thread for the top stitching on the pocket

Skill Level: Easy /Confident Beginner

What You Get: One 27 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!  *Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

larougetdelisle and the designers featured are not affiliated with Ruby Red Fashion Friends.

Vendor: Forever 18 Inches
Type: 18 Inch Modern
Price: 4.99

During the late 1930s through the 1950s a casual-wear staple in the female closet was a Playsuit. A typical Playsuit consisted of a one or two-piece outfit with short pants or bloomers worn at the beach or other casual warm-weather occasions, accompanied by a front-opening skirt that could be added or removed for a more covered look. A Playsuit set could be designed as beach wear with a bathing suit underlayer, as well as a casual outfit that could be worn during sports activities or outdoor events. The Forever 18 Inches Playsuit Skirt is an authentic reproduction of a vintage pattern. Features include a gathered skirt sewn into a fitted waistband, a front opening, and optional pockets. The skirt can close with button-covered snaps or hook and loop tape.

Three different waistband cutting lines are included to fit a range of 14" - 15" doll sizes. When you print this pattern, check to make sure that the scale is correct by measuring the 1” square scale on each page. Set the page margins on your printer to narrow and the print scale to none. When you begin sewing, pay special attention to the size of your seam allowances. This pattern was sized to fit snugly, and accurate seams are important to achieve a good fit. This pattern was sized on an American Girl WellieWishers™ Doll (Chest: 6-3/4", Waist: 5-7/8", Hips 7-3/4”) and Ruby Red Fashion Friends doll® (Chest: 7-1/8", Waist: 6-1/4", Hips: 7-3/4"). In addition, the pattern also fits Hearts for Hearts dolls® (Chest: 6-1/2", Waist: 5-3/4”, Hips: 7"), which have very similar measurements. The most critical measurement is the waist size. If your dolls' measurements are different from your doll of choice you may need to make adjustments to the pattern for an optimal fit. For a perfect fit, MEASURE YOUR DOLL'S WAIST while she's wearing the garment that will fit underneath the skirt before applying snaps or a hook and loop closure.

This PDF sewing pattern is designed to fit 14-15 inch dolls such as Hearts For Hearts Girls®, Ruby Red Fashion Friends®, and WellieWishers™.

Recommended Fabrics: Natural fabrics such as quilter's cotton, seersucker, lightweight denim, or lightweight chambray. All fabrics should have a tight weave.

Supplies Needed:
Fabric:

• ¼ yd. 45" wide fabric

Notions:

• Matching thread
• One pair of small, very sharp scissors to trim seam allowances
• Six ¼” buttons (for use with snaps only)
• Five or Six medium-sized snaps OR buttons (to be used with buttonholes)
• Fray Check
• Optional: Contrast thread for topstitching
• Optional: Two 3/8" x 6" wide strips of lightweight iron-on interfacing

Skill Level:  Easy

What You Get: One 21 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!  *Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

larougetdelisle and the designers featured are not affiliated with Hearts For Hearts Girls®, Ruby Red Fashion Friends®, or WellieWishers™.

Vendor: Forever 18 Inches
Type: Kruselings
Price: 5.99

The Faux Button Jumper, by Forever 18 Inches, for 9-inch Kruseling dolls features a free-hanging lining, options for a faux placket or decorative center front seam, an optional pocket, and shoulder straps attached with small snaps. A bonus dolman style tee shirt is also included to create a complete outfit.

This PDF pattern is designed to fit a 9" Kruseling doll. You can see more info on how this doll compares in size to other dolls on our Doll Measurements page.

A note from the designer, Karen Wadsworth: I've always loved dolls. I grew up with 11-1/2-inch fashion dolls, and when I first began sewing the first "real" pattern I ever used was a commercial pattern created to fit them. Much later in life I began sewing for 18-inch dolls, and as my involvement in the doll world grew I discovered articulated dolls. I was charmed. They're so much fun to pose and dress! When Kathe Kruse and Sonja Hartman created Kruseling® dolls I truly felt like I'd come full circle, fashion doll-sized AND articulated, too! I hope you enjoy this simple, seamstress-friendly pattern and enjoy playing alongside me.

Please view our other listings to see this pattern for 18" dolls such as American Girl,as weel as AGAT, Kidz N Cats, and Journey Girls dolls. 

Recommended Fabrics:  Options 1 & 2: ¼ yd. of light to semi-medium weight woven fabrics such as quilter's cotton, lightweight denim, chintz, chambray, or corduroy for the RIGHT side Main Fabric; lightweight fabric such as lawn or batiste for the Lining. Not suitable for stretch fabrics. Bonus tee shirt: Lightweight knit with a two-way stretch of about 15% up to approximately 30%.

Supplies Needed:

Jumper:
Fabric Requirements:
Option 1: ¼ yd. of "Bottom weight" fabric such as medium-weight twill, corduroy, denim, or heavy quilting fabric. Not suitable for stretch fabrics.

Option 2: ¼ yd. of light to semi-medium weight woven fabrics such as quilter's cotton, lightweight denim, chintz, chambray, or corduroy for the RIGHT side Main Fabric; lightweight fabric such as lawn or batiste for the Lining. Not suitable for stretch

All Options:

• Matching thread and optional contrast thread
• One pair of small, very sharp scissor to trim seam allowances.
• Nine ¼" buttons
• Two medium-sized snaps
• Very Lightweight interfacing (1/8 yd.)
• Optional: Fray Check™ for woven fabrics that tend to fray

Bonus Tee Shirt:

• 1/6 yd. OR an equivalent-sized scrap piece of lightweight knit with a two-way stretch of about 15% up to approximately 30%. 
• Two 1/4" wide pieces of double-sided ultra-thin hook-and-loop cut 2-1/4" long, OR one ½" wide piece cut 2-1/4" long, and then cut into two ¼" wide strips.
• Matching thread
• Small, very sharp scissors to trim seam allowances
• A scrap of very lightweight iron-on interfacing to stabilize the center back and hem ("Featherweight" is often used to describe the weight you'll need)
• Stabilizer such as, Coffee filters OR tissue paper OR paper towels

Skill Level: Confident Beginner

What You Get: One 36 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

larougetdelisle and the designers featured are not affiliated with Kruseling®.

Vendor: Forever 18 Inches
Type: 18 Inch Modern
Price: 7.99

There's nothing like a fireplace to evoke feelings of cozy warmth and comfort. Humans have been drawn to their hearths and flames for hundreds of years, and now it's time for dolls to have their own version, too!

The Crafter-Friendly Fireplaces pattern, by Forever 18 Inches, has been designed for people who love crafts but lack wood-working skills or tools. All of the pieces for the fireplaces can be cut with a sharp-bladed utility knife and are fitted together with hot glue, packaging tape, and glue sticks. Materials used for construction are common items easily found in craft and hobby stores, home building supply stores, dollar stores, and stationery supply vendors. A list of alternate materials that can be substituted for key items on each supply list is also included. Read through the instructions and alternative supply list before purchasing materials and beginning your project. You may save some money and travel time! 

Three finishing variations ranging from Easy to Intermediate are included:

• A Classic Fireplace made with painted balsa wood sheathing.
• A Rustic Fireplace with a faux rock covering
• A Simple Fireplace that can be created entirely from glue, Foam Core, and paper.

The PDF delivery will include 3 separate files, one for each finishing style.

This is a tutorial style crafting pattern. There are no pattern pieces to print out. All the measurements are provided to cut your pieces.

Also available - The Crafter Friendly Holiday Accessories pattern is designed to coordinate with this fireplace!

Supplies Needed:

Classic Fireplace, Rustic Fireplace, Simple Fireplace
To Construct the Fireplace Frame:

• Three sheets of approximately 21" wide x 30" long x 3/16"deep Foam Core board. (OR: cardboard from similarly-sized large boxes--just be prepared to adjust cutting measurements for certain pieces of the fireplace. No measurements for cardboard are given because of the variation in cardboard thicknesses.) (Note: if you substitute cut Foam Core for the brick paver, you'll need FOUR sheets of Foam Core board instead of three sheets.)
  
• A utility knife
• A long ruler for guiding cutting (I recommend a 24" metal ruler backed with cork to help prevent slipping)
• A large surface on which to cut Foam Core, paper, and balsa wood (I recommend a self-healing cutting mat used for fabrics that includes 45 degree cutting guidelines)
• A hot glue gun (the type used for crafting)
• A bag of hot glue gun sticks (you'll be using A LOT of glue)
• Two giant-sized school glue sticks in a tube (I used Elmer's Washable Purple School Glue Sticks®)
• A brick PAVER (not a full brick) measuring approximately 1-5/16" deep x 3-3/4" wide x 8" long to help weight and ground the fireplace
• Scissors for cutting paper
• Optional: A T-square to help make accurate 90 degree cuts
• Clear packaging tape used for shipping boxes
• One large flat-bristled brush with soft hairs and a good spring (bristle area approximately 1-1/2" long by 7/8" wide).
• Four pieces of 12" x 12" scrapbooking paper for the firebox and front facing (I used a brick-printed paper) OR one roll of similar adhesive-backed shelving paper, OR even gift-wrapping paper. Note: Plain black or dark gray paper may be substituted for the brick-printed paper.
• Optional: two pieces of 12" x 12" scrapbooking paper (OR adhesive-backed shelf paper OR gift-wrapping paper) to cover an optional Foam Core hearth (I used brick-printed paper to match the firebox.) One large roll or two small rolls of shelving paper should be enough for the inside of the firebox, the outside firebox facing, and hearth).
• One piece of 3/8" deep x 6" wide x 36" long balsa wood (for the mantle), OR two pieces of 12" x 12" scrapbooking paper (OR adhesive-backed shelf paper OR gift-wrapping paper) to cover a foam core mantle.
• Optional: a couple of small cosmetic sponges to rub out bubbles in the scrapbooking paper and to apply smoke patterns

Additionally - Classic & Rustic Fireplaces

• One piece of 1/8" deep x ½" wide x 36" long balsa wood (for the firebox trim) 
  
• Optional: Two pieces of 1/8" deep x 1/8" wide x 36" long balsa wood (for the firebox trim) 
  
• Optional: Omit Item Nos. 6 & 7 balsa wood trim and substitute one piece of purchased cove molding measuring approximately 11/16" wide that's at least 36" long. 
  
• Optional: a coping saw if you choose to use cove molding
  
• Optional: a miter box if you choose to use cove molding
  
• Spackle to fill in wood joints
  
• Extra fine-grit finishing sand paper to shape and smooth the balsa wood or cove molding
  
• Acrylic paint for the wooden sheathing, mantle, and trim (I used a large tube of white fine art paint with excellent coverage)
  
• A very small amount of black acrylic paint to simulate smoke patterns in the firebox

Additionally - Classic Fireplace Only

• Two pieces of 1/8"deep x 6" wide x 36" long balsa wood (for the fireplace sides & front sheathing)

Additionally - Rustic Fireplace Only

• Two paper egg cartons for the fireplace sides and partial front facing. 
  
• A quick-setting craft glue to apply the torn pieces of the egg carton to the fireplace.
  
• Optional: a couple of small cosmetic sponges to rub out bubbles in the scrapbooking paper, apply smoke patterns, and dab paint onto faux "rocks."
• Mod Podge® in a matt finish to seal the faux egg carton "rocks" and Mantle
• A light neutral-toned spray paint.

(All Versions):  Faux Flames  & Logs

• A flameless tea light
  
• Hot glue gun/glue sticks (already mentioned in the Part I Supply List)
  
• A small square of aluminum foil
  
• A red permanent marker with a chisel or medium-sized rounded tip 
  
• A yellow permanent marker with a chisel or medium-sized rounded tip
  
• A small branch cut into doll-sized pieces for logs
  
• A small amount of black acrylic paint and a brush to add a charred effect to the logs (paint and brush already listed in Part II Supply List) 

Skill Level:  Easy & Intermediate

What You Get: One 37 page, One 41 page, and One 43 page crafting pattern that you digitally download as a PDF file so you can start your project immediately! The PDF crafting pattern provides full color step-by-step illustrated instructions. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Forever 18 Inches
Type: 18 Inch Modern
Price: 4.99

There's nothing like a fireplace to evoke feelings of cozy warmth and comfort. Humans have been drawn to their hearths and flames for hundreds of years, and now it's time for dolls to have their own version, too!

The Crafter-Friendly Holiday Accessories pattern, by Forever 18 Inches, has been designed to pair with a Forever 18 Inches Crafter-Friendly Fireplace. The pattern includes two easy-level sewing projects: A reversible Mantle Covering, and a simple Stocking that attaches to the Mantle Covering for easy decorating. Two simple craft projects for a faux pine-branch Garland and cone-shaped Spiral Trees are also part of the package. Suggestions for alternate materials that can be substituted for the Spiral Tree are also included.

Supplies Needed:
Fabric Requirements:
Mantle Cover: ½ yd. Main Fabric and ½ yd. Lining
Stocking: ¼ yd. (or scrap) for the Stocking; 1/6 yd. (or scrap) for the Stocking Top, and a small scrap of very lightweight interfacing

Recommended Fabrics: For the Mantle Covering and Stocking: A medium-weight fabric such as Kona Cotton or quilter's cotton, lightweight velveteen or corduroy, or bridal-weight satin or taffeta. For the top of the Stocking: Lightweight fleece or a lightweight minky or fur. (Note: If you use a heavier fabric such as velveteen for one side of the Mantle Covering the reverse side should be a lightweight fabric.)

Notions:
1. Matching thread
2. One pair of small, very sharp scissors to trim seam allowances
3. Optional: Fray Check®
4. A Frixion® pen or other marking tool
5. Optional: a hemostat for turning small pieces
6. A medium-sized snap for attaching the Stocking to the Mantle Cover.
7. Optional: A couple of fishing weights with the hook removed to hold the Mantle Covering in place.

For the Mantle Garland:
1. An artificial wreath that's about 14" wide (or other source of pine-like branches)
2. Very lightweight green floral wire
3. A 17" piece of twine or string (I used one that was green to blend with the pine branches)
4. Small shiny or glittery beads

For each Spiral Tree:
1. One miniature clay pot about 3-1/8" in diameter across the top
2. One miniature cone-shaped Christmas tree, about 8-1/4" tall from base to tip
3. A glittery or shiny string of beads for each tree (I used a holiday necklace from my local dollar store and just cut the clasp off)
4. A hot glue gun and glue sticks and quick-drying tacky glue

Spiral Tree Substitute Materials:
1. A lid/cap from a can of hairspray (or other similar size cap)
2. A Styrofoam cone measuring approximately 6" tall and 3" wide at the base
3. Floral moss
4. A wooden shish kebab skewer
5. Matte Mod Podge®
6. Quick-drying tacky glue
7. Green acrylic paint and a brush
8. Gold spray paint
9. A glittery or shiny string of beads for each tree

Skill Level:  Easy

What You Get: One 28 page sewing and crafting pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Forever 18 Inches
Type: 18 inch Historical
Price: 7.99

The Double Dutch Jumper and Blouse pattern, by Forever 18 Inches, features a jumper with a cut-away bodice with suspender-style straps, a circular skirt, and a coordinating blouse with a collar, bishop sleeves, and a back closure. The blouse can be embellished with a tie under the collar or a ribbon bow. Jumper variations include pocket flaps, a faux front-button opening on the bodice, and a double skirt option. Two sets of cutting lines are included to accommodate the broad range of sizes often found with soft-bodied dolls. Mix and match your favorite elements for your own personalized schoolgirl look!

"I can do a polka, I can do a split, I can do a tap dance, just like this! 1, 2, 3…"

Jumping rope and skipping chants are time-honored traditions enjoyed by school-aged children since the beginning of America. Double Dutch jump rope games originated with Dutch settlers in the New York state area, and take the genre one step further by adding an extra rope turned in the opposite direction. In recent decades the game has evolved into a highly competitive sport that requires a precise sense of timing, endurance, and athletic ability. The Double Dutch Jumper is a retro-inspired pattern that pays homage to the early days of the sport when jumping rope was a game played during school recess, skirts were twirly, and referees were hawk-eyed classmates who couldn't wait for their own turn in the ropes!

This PDF sewing pattern is designed to fit 18" dolls such as American Girl®.  

Suggested Fabrics: Recommended Fabrics: For the Jumper:  a medium-weight fabric such as Kona Cotton or quilter's cotton, light to medium weight fabric for the Blouse, and lightweight fabric such as lawn or batiste for the Tie, Lining and Blouse bias finishing strip.

Supplies Needed:

Fabric Requirements:

• Option 1 Jumper: 1/3 yd. Main Fabric and 1/6 yd. Lining Fabric 
• Option 2 Jumper: 1/3 yd. Main Fabric (add an extra ¼ yd. for contrasting lower Skirt) and 1/6 yd. Lining Fabric 
• Option 3 Blouse: 1/4 yd. of Main Fabric and 1/4 yd. Collar Lining and bias finishing strip (or large scrap)

• 1. Matching thread and optional contrast thread 
• 2. One pair of small, very sharp scissors to trim seam allowances
• 3. Optional: Fray Check®
• 4. A Frixion® pen or other marking tool 
• 5. Optional: a hemostat or long pair of tweezers for turning small pieces
• 6. Optional: coffee filters OR tissue paper OR embroidery stabilizer to use as a backing when edge stitching
• 7. Optional: 1/3 yd. narrow elastic jewelry cord for Tie

• 1. Six ¼" buttons
• 2. Two medium-size snaps 

Option 3:

• 1. Three small or medium snaps OR hook and loop for back closure

Skill Level:  Intermediate

What You Get: One 62 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A 7 page summary of instructions is included to help save on printer ink.  A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Forever 18 Inches
Type: WellieWishers
Price: 5.99

Ahoy Mateys! Here's a Nautical Top and Dress, by Forever 18 Inches, to shiver your timbers: they're both quick sewing projects with three main pattern pieces--and there's no facing, no lining or set-in sleeves, which means no fuss! This PDF doll clothes pattern is designed to fit 13" - 14.5" dolls such as  Minouche, Hearts For Hearts Girls®, and Welliewishers™.

The Classic Sailor Collar and Dickey are equally fast and simple to construct because they're detachable rather than permanently stitched into the neckline. When your dolls are feeling their sea legs the Collar and Dickey can be snapped together and fitted over the Top or Dress; if they feel like styling a simple shift or blouse with a sophisticated cut the Dress or Top can be worn independently. The Dress also has an option for a tacked-in Dickey for a streamlined nautical vibe.

Seamstresses will have fun playing around with the multiple options and combinations that can be made with this pattern--and because it's an easy-level, user-friendly pattern it's perfect for on-line sellers and craft fairs. Use this versatile pattern to create a variety of looks easily and quickly. You'll be collecting "Pieces of Eight" wherever you sell!

The Nautical Top & Removable Collar design is also available for 18" dolls separately.

Suggested Fabrics:

• For the Top:  light to medium-weight fabric made with natural fibers.  For the Dress:  medium-weight fabric made in a natural fiber such as Kona cotton.
• For the Collar/Dickey:  medium-weight fabric in a natural fiber such as Kona cotton.
• For the Collar Bow:  lightweight silky fabric or a lightweight natural fabric

Fabric Requirements:

• Option 1 Top: ¼ yd. 45" wide fabric OR large scrap
• Option 2 Removable Collar (w/Dickey): ¼ yd. 45" wide fabric OR large scrap
• Option 3 Bonus Dress (w/Dickey): 1/3 yd. 45" wide fabric
• Collar Bow: 1/6 yd. 45" wide fabric OR large scrap

Supplies Needed All Options:
1. Matching thread and optional contrast thread
2. One pair of small, very sharp scissors to trim seam allowances
3. Optional: Fray Check®
4. A Frixion® pen or another tool to mark the collar and bodice
5. Optional: a hemostat or long pair of tweezers for turning the Collar and Dickey

For the Top or Dress:
1. Three medium-sized snaps OR a 5-1/2" x 3/8" piece of hook-and-loop tape
2. One 3/8" x 2" strip of very lightweight fusible interfacing for the top of Insert B
3. Optional: Eight ¼" (or smaller) buttons

For the Collar:
1. Dickey G: four small snaps
2. Dickey G: chalk (I used a stick of regular blackboard chalk)
3. 2/3 yd. of 1/8" or 3/16" Middy Braid OR Soutache Braid OR Ribbon*
*Use the Ribbon for Collar E only. Use more flexible trim such as Soutache or Middy Braid with Collar D.

Skill Level: Confident Beginner

What You Get: One 34 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!  *Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

PixieFaire and the designers featured are not affiliated with WellieWishers™

Vendor: Forever 18 Inches
Type: WellieWishers
Price: 6.99

The Versatility Dress: classically simple, with so many possible looks! Dress it up with fancy material and an elegant sash, or keep it casual with informal fabrics. A lined bodice with princess seams or a plain simplified version can be combined with three different skirt and belt options for a variety of personalized looks.

This doll clothes sewing pattern, by Forever 18 Inches, is designed to fit 14" dolls such as Hearts For Hearts Girls®, 14.5" Dolls such as WellieWishers®, and 15" dolls such as Ruby Red Fashion Dolls.

A bonus tutorial showing how to sew an attached lining with finished seams is also included. If this is a new technique to you, I encourage you to read it first before you begin sewing. I hope it makes a sometimes mysterious process easy to understand and apply. Finally, for those who may be new to sewing, I’ve written the directions comprehensively with many explanatory details and step-by-step photos. If you’re an experienced seamstress, you will probably be able to sew this dress just by reading the written-only instructions included at the back of the pattern. Happy sewing!

The Versatility Dress design is also available for 18" dolls separately.

Suggested Fabrics: Quilter's cotton, lightweight denim, Kona cotton or other similar medium-light to medium-weight natural fabrics. 1/6 yd. of lightweight fabric such as lawn or batiste is needed for the Lining.

Fabric Requirements:

• Option 1: ½ yd. of 45” wide woven fabric
• Option 2: 1/3 yd. total for woven fabric 
• Option 3: 1/3 yd. of 45" wide woven fabric
• Lining: 1/6 yd. (or scrap) of woven fabric

Supplies Needed:

• All Options:

1. Matching thread
2. Three small snaps OR two pieces of thin ¼” wide hook-and-loop tape, about 3 ½” long
3. Optional but HIGHLY RECOMMENDED: a HEMOSTAT for turning the bodice right-side out
4. Small, very sharp scissors to trim seam allowances
5. Fray Check®

• For the Belts:

1. Two 3/8" wide "D" rings for the D-Ring Belt
2. A narrow scrap (12" x 1-1/2") of woven fabric for the D-Ring Belt
3. 13-1/4" of 3/8" ribbon for the Ribbon Belt
4. Small pieces of Hook and Loop for the Ribbon Belt Closure
5. A quick-drying, flexible fabric glue such as Fabri-Tac® for the Ribbon Belt

Skill Level: Intermediate

What You Get: One 58 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!  *Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

PixieFaire and the designers featured are not affiliated with WellieWishers™

Vendor: Forever 18 Inches
Type: 18 Inch Modern
Price: 5.99

Caring for a garden is a time-honored pleasure that has been shared through many ages and cultures.  Now your doll can plant, weed, and harvest too with the Forever 18 Inches "Little Gardener" pattern!  The pattern includes a frilly pinafore-style apron with a sectioned skirt pocket to hold gardening necessities, a hat with a floppy brim to protect your doll from the sun, dainty gardening gloves, and a bonus paper craft for tiny seed packets.  When you're finished sewing all she'll need is sun, water, soil--and a little imagination.  

This PDF sewing pattern is designed to fit 18" dolls such as American Girl®.  

Suggested Fabrics: Quilter's cotton, lightweight denim, Kona cotton or other similar medium-light to medium-weight natural fabrics.  1/6 yd. (total) of very lightweight fusible interfacing will be needed for Skirt Pocket A, Bib Pocket K, and the Option 3 Gardening Gloves. 

Supplies Needed:
Option 1 : Apron 1/2 yd. Main Fabric and ½ yd. Contrast Fabric for Ruffles and Binding, 1/6 yd. of Contrast Fabric for Skirt Apron (or small fabric scrap), 1/6 yd. of very lightweight fusible interfacing (or small scrap)
Option 2: Sun Hat & Tied Bow 1/4 yd. of the Main Fabric, and 1/4 yd. of Lining Fabric
Option 3: Gloves 1/6 yd. Main Fabric, 1/6 yd. Ribbing (or small scrap) OR two 3" long pieces of ¾" elastic, and 1/6 yd. of very lightweight fusible interfacing (or small scrap)

All Options:
1. Matching thread and sewing needle; optional contrasting thread
2. A pair of small, very sharp scissors to trim seam allowances
3. A Frixion® pen (or other marking tool) for marking Dots and tracing around templates (when touched with heat, the pen markings disappear!)
4. Optional: Fray Check®
5. Optional: a hemostat or long pair of tweezers for turning the Gloves and other small areas
6. Optional: ¼" graph paper to create the patterns for the bias Binding and Skirt Ruffle
7. Optional: coffee filters to help prevent thread bunching while sewing

Option 1: Gardening Apron
1. Four ¼" buttons
2. Cellophane tape (to create stitching guides)

Option 2: Sunhat
1. For the Hat crown and back opening: two pieces of ¼" elastic measuring 5.5" and 8.5"
2. A small safety pin for threading elastic
3. Cellophane tape to group the pattern piece and template together

Option 4: Seed Packets
1. Glue stick
2. Heavier weight printer paper
3. Craft scissors for cutting paper
4. Optional: very small seeds (sesame, poppy, etc.) to fill the seed packets


Skill Level:  Intermediate

What You Get: One 62 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A 7 page summary of instructions is included to help save on printer ink.  A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Forever 18 Inches
Type: A Girl For All Time
Price: 5.99

One of my favorite childhood memories was playing “dress up” with the full-circle petticoat that my mother used to pouf the skirt of her ballerina-style wedding dress. It was a wonderful fantasy of crunchy net, organza, lace, and tulle, and it fell all the way to my ankles—except when I’d twirl around in it, which would make it stand straight out! This Forever 18 Inches pattern is a nod to those fun moments and a tribute to my mother, who I suspect kept the increasingly shabby petticoat far beyond its natural lifespan for my sake. I hope you enjoy creating your own interpretation, and perhaps giving another little girl the same sense of fun and fantasy play that I had.

 
The Option 1 Skirt Overalls feature a full circle skirt, lined bib, straps, a waistband that attaches with snaps in the back, and an optional front pocket. The Option 2 Bonus Variation is identical to Option 1, except that it has a gathered dirndl-style skirt instead of a full circle skirt.

This PDF sewing pattern is designed to fit 16" A Girl For All Time® dolls and 17" Sylvia Natterer Starlette dolls.  It is also available designed to fit 14.5" dolls such as WellieWishers™ as well as 18" Kidz N Cats® and 19" Gotz® dolls. 

Recommended Fabrics:  All Options: Medium-weight quilter's cotton (or other similar fabrics) with a bit of drape

Supplies Needed:
Option 1 Circle Overalls:
1. 1/3 yd. of 45" wide fabric such as medium-weight quilter's cotton (or other similar fabrics) with a bit of drape
2. Four ¼" buttons
3. Three medium-sized snaps
4. Matching thread
5. Small, very sharp scissors
6. Fray Check®
7. Scrap of fabric for the Bib Lining
8. Optional: Scrap of lightweight iron-on interfacing for the Bib

Option 2 Gathered Skirt:
1. 1/2 yd. of 45" wide medium-weight quilter's cotton (or other similar fabric)
with a bit of drape
2. Matching thread
3. Small, very sharp scissors
4. Optional: ¼" graph paper to create the skirt pattern piece
5. Three medium-sized snaps
6. Fray Check®
7. Scrap of fabric for the Bib Lining
8. Optional: Scrap of lightweight iron-on interfacing for the Bib

Skill Level: Intermediate

What You Get: One 30 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Forever 18 Inches
Type: 18 Inch Modern
Price: 5.99

If your doll loves the holiday season and baking fancy cookies for friends and loved ones this pattern is for you! The North Pole Cookie Party pattern, by Forever 18 Inches, features three different pinafore-style aprons that will satisfy the fashion dreams of the most discriminating workshop elf. Choices include themes for an elf, Santa Claus, a retro-styled overall, and a bonus pattern for an authentically constructed potholder. The Option 3 Overall can also be used as a retro-style pinafore for historical outfits. Start sewing these whimsical aprons now to prepare for holiday feasting and sing-alongs. (S-h-h-h-h-h…be careful...don't tell any furry green Santa impersonators!)

To get the layered look on the pattern cover, combine the aprons with the Forever 18 Inches Elastic Back Circle Skirt with the Liberty Jane T-Shirt Variations and Leggings patterns!

This PDF sewing pattern is designed to fit 18" dolls such as American Girl®.  

Recommended Fabrics:  All Options: A medium-weight fabric such as Kona Cotton for the Bib and Skirt and Ruffle, very lightweight fabric such as lawn or batiste for the Lining, lightweight Fleece, Minky, or very lightweight fur for the trim on the Option 2 Santa Apron

Supplies Needed:
Fabric Requirements:
Option 1 Elf Apron: Main fabric and Lining: ¼ yd. 45" fabric; Contrast Ruffle: 1/6 yd. 45" fabric
Option 2 Santa Apron: Main fabric: 1/3 yd. 45" fabric; Lining: 1/6 yd.; Fleece trim: 2/3 yd.
Option 3 Overalls Apron: Main fabric: 1/3 yd. 45" fabric; Lining: 1/4yd. 45" fabric
Bonus Potholder: Scraps of lightweight Fleece and Main Fabric that can be cut into 3-1/2" squares (two Main Fabric, one Fleece)

Notions/All Options:
1. Matching thread and optional contrast thread
2. One pair of small, very sharp scissors to trim seam allowances
3. Optional: Fray Check®, ¼" graph paper to create Ruffle rectangles
4. A Frixion® pen or other marking tool
5. Optional: a hemostat or long pair of tweezers for turning the Ties
6. Coffee filters to use as sewing guides on narrow edges

For the Option 1 Elf Apron:
1. A 12" x 18" rectangle of heavy-weight felt
2. 1/4yd. of 3/8" to ½" wide black ribbon and a scrapbook slide that fits through it
3. Two yards of narrow trim
4. Optional: Tiny bells and/or beads to trim the felt Overlay

For the Option 2 Santa Apron:
1. 1/4yd. of 3/8" to ½" wide black ribbon and a scrapbook slide that fits through it
2. Optional: Two to three ¼" black buttons

For the Option 3 Overalls Apron:
1. Four ¼" buttons
2. Two medium-sized snaps
3. A scrap of very lightweight fusible interfacing for the Pocket

For the Bonus Potholder: 12" of ¼" wide double-sided bias tape

Skill Level:  Intermediate

What You Get: One 53 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A 7 page summary of instructions is included to help save on printer ink.  A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

Vendor: Forever 18 Inches
Type: WellieWishers
Price: 4.99

If you grew up in the 1960s, it's likely that you would have watched an animated television program called the Flintstones. A playful take on entertainer Jackie Gleason's "The Honeymooners" series, it broadcast the exploits of a "modern Stone-Age family." This pattern, by Forever 18 Inches, is a nod to that show and those times, and a great choice for a 1960s or modern-day costume for 14.5" dolls.

The tunic has three main pattern pieces and is designed for use with non-fraying fabrics to eliminate hemming. This quick and easy-level sewing project is a great choice for craft-show sellers, Etsy vendors, and would also be a perfect mother-daughter project for cold winter months. Non-fraying costume suede, faux suede, or a cotton quilter's fabric backed with lightweight iron-on interfacing can be used to create the dress. Instructions for the fashionable Stone Age accessories are also included.

This PDF sewing pattern is designed to fit 14.5 inch dolls such as WellieWishers™. It is also available for 18" dolls such as American Girl®. 

Recommended Fabrics:  Non-fraying fabrics such as costume suede, faux suede, OR quilter's cotton or flannel backed with very lightweight iron-on interfacing. NOT SUITABLE FOR KNITS unless backed with very lightweight fusible interfacing

What You Get: One 25 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!  *Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

larougetdelisle and the designers featured are not affiliated with WellieWishers™

Vendor: Forever 18 Inches
Type: 18 Inch Modern
Price: 5.99

Ahoy Mateys! Here's a Nautical Top and Dress, by Forever 18 Inches, to shiver your timbers: they're both quick sewing projects with three main pattern pieces--and there's no facing, no lining or set-in sleeves, which means no fuss! The Classic Sailor Collar and Dickey are equally fast and simple to construct because they're detachable rather than permanently stitched into the neckline. When your dolls are feeling their sea legs the Collar and Dickey can be snapped together and fitted over the Top or Dress; if they feel like styling a simple shift or blouse with a sophisticated cut the Dress or Top can be worn independently. The Dress also has an option for a tacked-in Dickey for a streamlined nautical vibe. Seamstresses will have fun playing around with the multiple options and combinations that can be made with this pattern--and because it's an easy-level, user-friendly pattern it's perfect for on-line sellers and craft fairs. Use this versatile pattern to create a variety of looks easily and quickly. You'll be collecting "Pieces of Eight" wherever you sell!

This PDF sewing pattern is designed to fit 18" dolls such as American Girl®. 

Recommended Fabrics:  For the Top: light to medium-weight fabric made with natural fibers. For the Dress: medium-weight fabric made in a natural fiber such as Kona cotton. For the Collar/Dickey: medium-weight fabric in a natural fiber such as Kona cotton. For the Collar Bow: lightweight silky fabric or a lightweight natural fabric

Supplies Needed:

Fabric Requirements:
Option 1 Top: ¼ yd. 45" wide fabric OR large scrap
Option 2 Removable Collar (w/Dickey): ¼ yd. 45" wide fabric OR large scrap
Option 3 Bonus Dress (w/Dickey): 1/3 yd. 45" wide fabric
Collar Bow: 1/6 yd. 45" wide fabric OR large scrap

All Options:
1. Matching thread and optional contrast thread
2. One pair of small, very sharp scissors to trim seam allowances
3. Optional: Fray Check®
4. A Frixion® pen or other tool to mark the collar and bodice
5. Optional: a hemostat or long pair of tweezers for turning the Collar and Dickey

For the Top or Dress:
1. Three medium-sized snaps OR a 5-1/2" x 3/8" piece of hook-and-loop tape
2. One 3/8" x 2" strip of very lightweight fusible interfacing for the top of Insert B
3. Optional: Eight ¼" buttons

For the Collar:
1. Dickey G: four small snaps
2. Dickey G: chalk (I used a stick of regular blackboard chalk)
3. 2/3 yd. of 1/8" to 3/16" Middy Braid OR Soutache Braid OR Ribbon*
*Use the Ribbon for Collar E only. Use more flexible trim such as Soutache or Middy Braid with Collar D.

Skill Level:  Confident Beginner 

What You Get: One 34 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

larougetdelisle and the designers featured are not affiliated with American Girl®. 

Vendor: Forever 18 Inches
Type: 18 Inch Modern
Price: 4.99

Who doesn't love old movies? Vintage black and white films, also known as the silver screen, told exciting stories aided by glamorous fashion, handsome heroes, and beautiful actresses. The Silver Screen Wrap Top, by Forever 18 Inches, gives homage to that era where femininity was highlighted and women never left the house without wearing red lipstick.

Inspired by a vintage pattern, this quick-sewing top features a lined bodice with an overlay that can be cut on the bias, straight grain, or cross grain. Halter ties around the neck and a bodice that criss-crosses in the back with attached waist ties ensure an easy, universal fit for a variety of 18" dolls. A bonus headband is also included as an extra perk for a coordinated look. Start sewing now and watch a classic old movie with your doll dressed in style--and don't forget the popcorn!

This PDF sewing pattern is designed to fit 18" dolls such as American Girl®. 

Recommended Fabrics: Lightweight woven fabrics with a tight weave such as lawn or batiste are recommended for this pattern. A lightweight quilter's cotton with a soft drape is ideal. Avoid stiff, coarse fabrics.

Supplies Needed:

- Option 1 Wrap Top & Headband: 1/2 yd. 45" wide fashion fabric & 1/4 yd. (or equivalent scrap piece) of lightweight fabric such as batiste or lawn for the Lining.

- Lining for Top : 1/6 yd. 45" wide fabric


All Options:
1. Matching thread and optional contrast thread
2. One pair of small, very sharp scissors to trim seam allowances
3. Optional: Fray Check®
4. A Frixion® pen or other tool to mark dots on the bodice
5. One 2" piece of 3/8" elastic for the Headband
6. Optional: a hemostat or long pair of tweezers for turning the Bodice and Headband

Skill Level:  Intermediate

What You Get: One 31 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

larougetdelisle and the designers featured are not affiliated with American Girl®. 

Vendor: Forever 18 Inches
Type: 18 Inch Modern
Price: 6.99

The Italian word serenata means "an evening song," and the noun serenade is a tune played or sung, either for one specific person or for a larger audience, outside.* The Serenade Maxi Dress, by Forever 18 Inches, is a nod to romance and balmy evenings, where casual glamour and an evening under the stars combine to create that one unforgettable dress that's remembered long after the special occasion has become a memory. The dress features a fitted, dropped bodice with a graceful curve, a high-low skirt, and pretty bias ties that add an unexpected touch to the back. The skirt can be gathered, ruffled, banded, or a graceful circle that's ready to twirl during a dance. Two sets of cutting lines and comprehensive step-by-step instructions ensure a good fit and a pleasant sewing experience for a wide range of seamstress sewing skills. Special directions that make it easy to gather and attach yards of ruffles are also included. You can even hum a favorite song to your doll as you sew in anticipation!

This PDF sewing pattern is designed to fit 18" dolls such as American Girl®. 

Recommended Fabrics:  Medium-light to medium weight quilter's cotton with a bit of drape and tight weave are ideal. Other natural fabrics such as chambray or even a lightweight bridal satin would also work. Fabrics for the Facing or Lining could be batiste or lawn for cotton fabrics, or a shiny lining fabric if using a dressy fabric such as satin.

Supplies Needed:
- Option 1: 2/3 yd. of 45" wide fabric
- Option 2 : 2/3 yd. of 45" wide fabric
- Option 3: 1 yd. of 45" wide fabric

- All Options: 1/4 yd. (or equivalent scrap piece) of lightweight fabric such as batiste or lawn for the Lining.

All Options:
1. Matching thread and optional contrast thread
2. Three medium-sized snaps OR approximately 4" of Hook-and-Loop
3. One pair of small, very sharp scissors to trim seam allowances
4. Fray Check®
5. A Frixion® pen or other tool to mark dots on the bodice

Skill Level:  Easy & Intermediate 

What You Get: One 56 page sewing pattern that you digitally download as a PDF file so you can start your project immediately! The PDF sewing pattern provides full color step-by-step illustrated instructions and full size pattern pieces. A 6 page Summary of Instructions is also included to help save on printer ink.  A PDF reader is required to view and print the files (example: Adobe Reader or Preview for MAC). The download link is received immediately after the transaction is complete. Print copies are NOT available.

Download, Print, Sew!

*Creating a customer account will ensure that you have the ability to access your purchased (and free) files at any time.

For detailed information and answers to the most common questions, be sure to read the Terms of Use and FAQ's related to the doll clothes patterns sold at larougetdelisle.

PixieFaire and the designers featured are not affiliated with American Girl®.